Dual Control Potentiometer Dual Stacked Concentric Pots
Dual Control Potentiometer Dual Stacked Concentric Pots
Dual Control Potentiometer Dual Stacked Concentric Pots(Please Read the Details) Premium quality and long life dual control pots. Typically found on Bass and some guitars. Used to reduce the need for additional potentiometer slots and holes. Each shaft controls the two independent potentiometers. This can be used as 2.
Dual Control Potentiometer Dual Stacked Concentric Pots
(Please Read the Details)
Premium quality and long life dual control pots.
Typically found on Bass and some guitars.
Used to reduce the need for additional potentiometer slots and holes.
Each shaft controls the two independent potentiometers.
This can be used as 2 independent volume control or 1 volume, 1 tone control, and a lot more!
Perfect for guitar wiring electronics upgrade!
Specs:
- The mounting hole diameter should be at least 7.9mm
- Bushing height is 3/8” or 9.5mm
- Small (upper) shaft diameter is 5.8mm
- Big (lower) shaft diameter is 7.8mm
- Plain (Solid) shaft
- Solder Lugs with Center Detent
- PC Pins No Center Detent
Options available:
Linear Taper - B50k (with center detent)
Linear Taper - B50k PC Pins (no center detent)
Linear Taper - B100k (with center detent)
Linear Taper - B250k (with center detent)
Linear Taper - B500k (with center detent)
Includes:
1 potentiometer
2 hex Nuts and Washers
1 washer
**********
We specialize in custom guitar wiring and handwound pickups.
Please let us know if you have questions or clarification.
You can also check our website for more wiring guide info.
Feel free to send a message and we will reply asap.
Thank you!
.Dual Control Potentiometer Dual Stacked Concentric Pots(Please Read the Details) Premium quality and long life dual control pots. Typically found on Bass and some guitars. Used to reduce the need for additional potentiometer slots and holes. Each shaft controls the two independent potentiometers. This can be used as 2 independent volume control or 1 volume, 1 tone control, and a lot more! Perfect for guitar wiring electronics upgrade! Specs: - The mounting hole diameter should be at least 7.9mm - Bushing height is 3/8” or 9.5mm - Small (upper) shaft diameter is 5.8mm - Big (lower) shaft diameter is 7.8mm - Plain (Solid) shaft - Solder Lugs with Center Detent - PC Pins No Center Detent Options available: Linear Taper - B50k (with center detent) Linear Taper - B50k PC Pins (no center detent) Linear Taper - B100k (with center detent) Linear Taper - B250k (with center detent) Linear Taper - B500k (with center detent) Includes: 1 potentiometer 2 hex Nuts and Washers 1 washer ********** We specialize in custom guitar wiring and handwound pickups. Please let us know if you have questions or clarification. You can also check our website for more wiring guide info. Feel free to send a message and we will reply asap. Thank you!
PRODUCT INTRODUCTION WEIGHT: 12G/Piece.
1 Piece Alpha Stacked Dual Concentric Potentiometer(POT) No Center Detent
1 Piece Stacked Dual Concentric Potentiometer(POT) With Center Detent
Alpha A250K Concentric Stacked Pot Set of 2 (LOW RESISTANCE)
C100K x 2 + B20k Stacked Dual Concentric Potentiometers (POT) with Center Detent
Potentiometer
(Please Read the Details), Premium quality and long life dual control pots.Typically found on Bass and some guitars.Used to reduce the need for
Dual Control Potentiometer Dual Stacked Concentric Pots (PC Pins)
Dual Control Potentiometer Dual Stacked Concentric Pots
Fender CTS Concentric 250K/500K Audio Solid Shaft Potentiometer (Volume and Tone) (001-9268-049) (0019268049)
Professional 1 Piece Guitar Bass Dual Pot Stacked Concentric Potentiometer with Center Detent Musical Accessories in Stock Good
Find many great new & used options and get the best deals for 1 Piece Stacked Dual Concentric Potentiometer(POT) With Center Detent at the best online
1 Piece Stacked Dual Concentric Potentiometer(POT) With Center Detent
Blend / Concentric / Dual Gang –
