Infrared ECU 220VAC Wall Outlet Controller with Remote – Inclusive Inc

May 17,2024

Features: Control lamps, fans, older style radios or TVs without a remote - virtually any electrical device or appliance you plug into an outlet Controls up to three lamps or devices simultaneously (all controlled together) Learning IR InfraRed remote receiver works with virtually all existing infrared handheld remotes.

Features:

Control lamps, fans, older style radios or TVs without a remote - virtually any electrical device or appliance you plug into an outlet
Controls up to three lamps or devices simultaneously (all controlled together)
Learning IR InfraRed remote receiver works with virtually all existing infrared handheld remotes you already have for TV/DVD/Satellite/Cable/etc.
Sensitive wide IR reception angle - does not require strict line-of-sight during operation
Maximum total power: 220VAC 2A 500W for International customers
- Do not exceed maximum total power or you will damage! Read your device's label. i.e. One 500W compact space heater or 3 100W lamps

Usage:

Before starting, you will need any infrared handheld remote such as for your TV or stereo. Choose a button on the remote you rarely or otherwise never use. [Idea: If you have a universal remote, one of its modes, i.e. VCR, that you are not using can be programmed to any device code such as 1111. Then the power button of your universal remote for that VCR mode will control the Infrared ECU AC Wall Outlet Controller.]
Plug any 220 VAC device up to 2 Amps such as a lamp or fan into the Infrared ECU AC Wall Outlet Controller. The plug on the front accepts polarized and grounded plugs, while the 2 smaller plugs on size will accept small non-polarized plugs. The sockets are universal and will work with most plugs from around the world.
Control 1 device or up to three devices simultaneously. All three devices will go on and off together, it is not possible to control the three devices separately or individually.

Training:

Push the little black button on the front of the Infrared ECU AC Wall Outlet Controller to turn on the device you have plugged into it. The red LED on the front will be lit.
Push and hold the black button. Your device will turn off but then after about 3-5 seconds it will turn back on, then let go of the black button. Now the red LED on the front will be flashing.
While the red LED is flashing, push any button on any infrared handheld remote pointing the remote at the Infrared ECU AC Wall Outlet Controller. The controller will learn the infrared signal from your handheld remote and the red LED will go out.
Test by pushing the button you just trained on your infrared handheld remote and the device plugged into the controller should turn on and off. Finally, if using the Infrared ECU AC Wall Outlet Controller with an environmental controller (ECU) such as the VoiceIR Environmental Voice Control System VoiceMe, use the button you just trained on your infrared handheld remote to train your ECU.

.
Features: Control lamps, fans, older style radios or TVs without a remote - virtually any electrical device or appliance you plug into an outlet Controls up to three lamps or devices simultaneously (all controlled together) Learning IR InfraRed remote receiver works with virtually all existing infrared handheld remotes you already have for TV/DVD/Satellite/Cable/etc. Sensitive wide IR reception angle - does not require strict line-of-sight during operation Maximum total power: 220VAC 2A 500W for International customers Do not exceed maximum total power or you will damage! Read your device's label. i.e. One 500W compact space heater or 3 100W lamps Usage: Before starting, you will need any infrared handheld remote such as for your TV or stereo. Choose a button on the remote you rarely or otherwise never use. [Idea: If you have a universal remote, one of its modes, i.e. VCR, that you are not using can be programmed to any device code such as 1111. Then the power button of your universal remote for that VCR mode will control the Infrared ECU AC Wall Outlet Controller.] Plug any 220 VAC device up to 2 Amps such as a lamp or fan into the Infrared ECU AC Wall Outlet Controller. The plug on the front accepts polarized and grounded plugs, while the 2 smaller plugs on size will accept small non-polarized plugs. The sockets are universal and will work with most plugs from around the world. Control 1 device or up to three devices simultaneously. All three devices will go on and off together, it is not possible to control the three devices separately or individually. Training: Push the little black button on the front of the Infrared ECU AC Wall Outlet Controller to turn on the device you have plugged into it. The red LED on the front will be lit. Push and hold the black button. Your device will turn off but then after about 3-5 seconds it will turn back on, then let go of the black button. Now the red LED on the front will be flashing. While the red LED is flashing, push any button on any infrared handheld remote pointing the remote at the Infrared ECU AC Wall Outlet Controller. The controller will learn the infrared signal from your handheld remote and the red LED will go out. Test by pushing the button you just trained on your infrared handheld remote and the device plugged into the controller should turn on and off. Finally, if using the Infrared ECU AC Wall Outlet Controller with an environmental controller (ECU) such as the VoiceIR Environmental Voice Control System VoiceMe, use the button you just trained on your infrared handheld remote to train your ECU.

Infrared ECU 220VAC Wall Outlet Controller with Remote – Inclusive Inc

Enables UIS controllers to work with outlet-powered devices like humidifiers, heaters, dehumidifiers, and A/Cs. Only equipment that can automatically start running when plugged into an outlet are compatible. Control and monitor your grow on your phone from anywhere with our latest WiFi-enabled UIS controllers. Automate climate triggers, cycles, timers, and scheduling; unlock data graphs and alert notifications via our app.

AC Infinity UIS Control Plug for Outlet-Powered Equipment

The wireless transmitter turns works up to 66 feet away. can help save money and energy in the OFF position, the receiver cuts power to device, eliminating wasteful standby power. Size: 1 Outlet.

Woods 59743 Indoor Wireless Remote Control Outlet, 1-Outlet

Universal A/C Remote Control Compatible with MCQUAY LG Panasonic Sharp Samsung Fujitsu Gree Guangda Guqiao Haier Helton Hemilton Hicon Hisense Hitachi Air Conditioner/Fahrenheit displaying

Carel IR33B7LR20 Electronic Controller

WIRELESS CONTROL KIT THAT CONTROLS UP TO 3 DEVICES: remotely control indoor lights and appliances up to a range of 100 ft; so no more having to run

Woods 13569 13569WD Indoor Wireless Remote Kit up to 66 ft. Range; Ideal for Holiday Decorations; Works Through Walls Windows and Doors; Controls up

C2G Legrand Infrared Remote Control Repeater, Black IR Remote Control Extender, Remote Control Repeater with 4 Emitters and 9 Foot Cord, 1 Count, C2G 40430 : Everything Else

Woods 13569 13569WD Indoor Wireless Remote Kit up to 66 ft. Range; Ideal for Holiday Decorations; Works Through Walls Windows and Doors; Controls up to 3 Devices; 3-Outlet Pack; White/Orange - Electrical

REMOTE OUTPUT CONTROL WITH 120V AC RECEPTACLES – 125 FT

EASY PAIRING: Smartphone IR remote controller has a stable and reliable IR signal that can be easily paired with your home appliances. ANTI LOSS

Universal Smartphone IR Controller Adapter, USB C Mini Infrared Remote Control for Air Conditioner TV DVD STB

This is a 433Mhz 90-250V 1 channel RF switch, it comes with 2 remote controls, it support RF control, RF signal is very stable and strong, you can

eMylo RF 433Mhz Wireless Relay Switch, AC 110V 120V 220V 240V 1 Channel Relay Remote Control Light Switch Receiver with 2 Transmitters, Wireless

Features:, Control lamps, fans, older style radios or TVs without a remote - virtually any electrical device or appliance you plug into an outlet,

Infrared ECU 220VAC Wall Outlet Controller with Remote